Cadac CDC four Bedienungsanleitung PDF herunterladen (Seite 43)

Revision 1 2012-13CDC FOUR

Aux outputs

A detailed block diagram of the Aux 0utputs may be found in the Appendix on

page 77.

The CDC FOUR has eight auxiliary sends, with outputs on the rear panel. All

the sends are mono. They may be used for external FX sends, or for foldback

purposes.

The Aux Send channels have processing similar to that of the Groups; the main

difference is the absence of any routing. The differences from a mono channel

are summarised below. The description of the mono mic/line channel applies in

all other respects. Refer to Page 32 onwards for full details.

Input stage:

All input functionality is removed. The Input Trim, high-pass lter and phase

controls are inoperative and their virtual counterparts do not appear on-screen.

Noise gate:

The Aux Send channels do not have noise gates. All noise gate controls are

inoperative and their virtual counterparts do not appear on-screen.

Limiter:

The Aux Sends’ dynamics sections have a dedicated limiter as well as the

compressor section tted to the input channels.

THR - adjusts the threshold of the Aux send’s separate limiter section in the range

-40 dB to +21 dB. Default setting is +21 dB (i.e., no limiting).

IN - switches the limiter into the signal chain. Default is Out.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 82 83

Keine Kommentare

Cadac CDC four Bedienungsanleitung Seite 43